Why does my image freeze from time to time? Is it a defect?
Quick answer
Image freezing during calibration is normal, not a defect. You can switch to Manual calibration mode if preferred but close the lens cover before calibrating.
No, this is not a defect. The image freezing is part of the calibration process, which ensures optimal image quality.
By default, the calibration mode is set to Automatic, meaning the device decides when calibration is necessary. You can switch to Manual mode in the Main Menu > Calibration Mode if you prefer to calibrate the riflescope yourself based on image quality.
When using Manual mode, always close the lens cover before calibrating. However, we recommend keeping the calibration mode set to Automatic for convenience and consistent performance.
For more details, refer to the user manual for your thermal device.
Thermal Imaging Riflescopes Common Questions
Can I power my riflescope using a 12V car adapter?
My riflescope turns off after a shot. What should I do?
My riflescope won’t hold zero. What should I do?
Can I use the Talion riflescope during the daytime?
Why is my image blurry or out of focus?
Why do I see a ghost image or residual artifacts from the previous image?
I hear a clicking sound during calibration. Can I disable it?
Why is it necessary to calibrate the image on a thermal imager?
What should I do about defective pixels on my thermal imaging device screen?
What is the recommended torque setting for installing the Talion riflescope?
Why is the reticle off-center after zeroing?
Will the riflescope save my zeroing profiles if it’s powered down for an extended period?
My image is blurry when I use digital zoom. Is it a defect?
Can I upload new reticles to my riflescope?
Can I use my Pulsar riflescope on a SCAR 17s rifle, which is known for its recoil?
Can I safely use my Talion riflescope on an air or pellet gun?
What is the purpose of the User Mode on Pulsar thermal imaging devices?
What is the recommended torque setting for mounting rings when installing the Thermion 2?
Why does a semi-circular flare appear at the bottom of the thermal image after a shot?
What makes the Thermion 2 LRF XL50 stand out compared to the Thermion 2 LRF XP50 PRO and Thermion 2 LRF XG50?
Does the scope have an Image Boost feature?
Why is my riflescope not measuring distance correctly?
The rangefinding reticle and aiming reticle don’t align. Is that normal?
Can I roll back to a previous firmware version on my device?
Can I use the Thermion 2 riflescope during the daytime?
What mounting rings do you recommend for the Thermion 2 riflescope?
Do I need permission to travel with my thermal imager to another country?
Can I replace the internal battery in my device myself?
Does the riflescope have recoil-activated video recording?
Which Thermion riflescopes support remote control, and how can I use it?
Are my zeroing profiles saved when I update my riflescope’s firmware?
What are the key features of the Talion riflescope?
What are the key differences between the Talion XQ and Talion XG models?
How do I mount the Talion riflescope on my rifle?
Still have a question?
Feel free to get in touch