Why is my riflescope not measuring distance correctly?
Quick answer
Distance measurement accuracy depends on target reflectivity, environmental conditions, and hand stability. Use a stable surface for long-range measurements to small targets.
If your riflescope is not measuring distance accurately, consider the following factors:
- Target Reflectivity:
Measurement accuracy depends on the reflection ratio of the target surface, which is influenced by:- Texture, color, and shape: Shiny or bright surfaces are typically more reflective than dark or dull ones.
- Target size: Measuring range to small targets is harder than to large ones.
- Environmental Conditions:
Light conditions, fog, haze, rain, snow, or bright sunlight (especially when measuring towards the sun) can impact ranging performance. - Hand Stability:
When targeting objects over 400 meters away, especially small ones, hand tremors can affect accuracy. Rest your elbow on a solid surface to stabilize the device and improve accuracy.
By addressing these factors, you can optimize your riflescope’s distance measurement performance.
Thermal Imaging Riflescopes Common Questions
Can I power my riflescope using a 12V car adapter?
My riflescope won’t hold zero. What should I do?
Can I use the Talion riflescope during the daytime?
Why is my image blurry or out of focus?
Why does my image freeze from time to time? Is it a defect?
Why do I see a ghost image or residual artifacts from the previous image?
I hear a clicking sound during calibration. Can I disable it?
Why is it necessary to calibrate the image on a thermal imager?
What should I do about defective pixels on my thermal imaging device screen?
My riflescope turns off after a shot. What should I do?
Why is the reticle off-center after zeroing?
Will the riflescope save my zeroing profiles if it’s powered down for an extended period?
My image is blurry when I use digital zoom. Is it a defect?
Can I upload new reticles to my riflescope?
Can I use my Pulsar riflescope on a SCAR 17s rifle, which is known for its recoil?
Can I safely use my Talion riflescope on an air or pellet gun?
What is the purpose of the User Mode on Pulsar thermal imaging devices?
Can I replace the internal battery in my device myself?
Why does a semi-circular flare appear at the bottom of the thermal image after a shot?
What makes the Thermion 2 LRF XL50 stand out compared to the Thermion 2 LRF XP50 PRO and Thermion 2 LRF XG50?
Does the scope have an Image Boost feature?
The rangefinding reticle and aiming reticle don’t align. Is that normal?
Can I roll back to a previous firmware version on my device?
Can I use the Thermion 2 riflescope during the daytime?
What mounting rings do you recommend for the Thermion 2 riflescope?
What is the recommended torque setting for mounting rings when installing the Thermion 2?
Do I need permission to travel with my thermal imager to another country?
Does the riflescope have recoil-activated video recording?
Which Thermion riflescopes support remote control, and how can I use it?
Are my zeroing profiles saved when I update my riflescope’s firmware?
What are the key features of the Talion riflescope?
What are the key differences between the Talion XQ and Talion XG models?
How do I mount the Talion riflescope on my rifle?
What is the recommended torque setting for installing the Talion riflescope?
Still have a question?
Feel free to get in touch