What is the purpose of the User Mode on Pulsar thermal imaging devices?
Quick answer
User Mode saves your brightness and contrast settings, ensuring optimal image quality without repeated adjustments. It stores settings for each observation mode, even when temporarily disabled.
The User Mode allows you to save your preferred brightness and contrast settings directly to the device’s memory. This ensures optimal image quality without needing additional adjustments every time you use the thermal imager.
- The function is enabled via the main menu and stays active until manually disabled.
- While active, the device saves the most recent brightness and contrast settings for each observation mode.
- These settings remain stored even if you temporarily disable User Mode. Reactivating it will restore your previously saved settings.
This feature is designed for convenience and consistency, providing you with the best possible image quality tailored to your preferences.
Thermal Imaging Riflescopes Common Questions
What should I do about defective pixels on my thermal imaging device screen?
My riflescope turns off after a shot. What should I do?
My riflescope won’t hold zero. What should I do?
Can I use the Talion riflescope during the daytime?
Why is my image blurry or out of focus?
Why does my image freeze from time to time? Is it a defect?
Why do I see a ghost image or residual artifacts from the previous image?
I hear a clicking sound during calibration. Can I disable it?
Why is it necessary to calibrate the image on a thermal imager?
What is the recommended torque setting for installing the Talion riflescope?
Can I power my riflescope using a 12V car adapter?
Why is the reticle off-center after zeroing?
Will the riflescope save my zeroing profiles if it’s powered down for an extended period?
My image is blurry when I use digital zoom. Is it a defect?
Can I upload new reticles to my riflescope?
Can I use my Pulsar riflescope on a SCAR 17s rifle, which is known for its recoil?
Can I safely use my Talion riflescope on an air or pellet gun?
What is the recommended torque setting for mounting rings when installing the Thermion 2?
Why does a semi-circular flare appear at the bottom of the thermal image after a shot?
What makes the Thermion 2 LRF XL50 stand out compared to the Thermion 2 LRF XP50 PRO and Thermion 2 LRF XG50?
Does the scope have an Image Boost feature?
Why is my riflescope not measuring distance correctly?
The rangefinding reticle and aiming reticle don’t align. Is that normal?
Can I roll back to a previous firmware version on my device?
Can I use the Thermion 2 riflescope during the daytime?
What mounting rings do you recommend for the Thermion 2 riflescope?
Do I need permission to travel with my thermal imager to another country?
Can I replace the internal battery in my device myself?
Does the riflescope have recoil-activated video recording?
Which Thermion riflescopes support remote control, and how can I use it?
Are my zeroing profiles saved when I update my riflescope’s firmware?
What are the key features of the Talion riflescope?
What are the key differences between the Talion XQ and Talion XG models?
How do I mount the Talion riflescope on my rifle?
Still have a question?
Feel free to get in touch